| Customization: | Available |
|---|---|
| Type: | Ultrasonic Level Meter |
| Contact: | Contactless |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
SUL801 ultrasonic level gauge is a very practical level measuring sensor with simple installation and convenient on-site commissioning. Not affected by the measured medium, It can measure the liquid level of various media very well. Especially for viscous media (similar to liquid glue, slurry, etc.), where the input level sensor is not suitable for practical use. It uses SMD components and ASC chip, which makes the circuit compact and concise. The circuit board is plated and has high stability and long-term reliability. Meanwhile, the shell uses NLEPF synthetic materials with sturdy texture and good acoustic property. The transducer can be used in most working condition sites. While fixing it on the liquid wall or instrument housing, there is no need tools such as screws, but a 68mm hole. It has the features of stabilization, easy installation and disassembly.
|
Ultrasonic sensor
|
Low power-sensor
|
Middle power-sensor
|
Large power-sensor
|
|||
|
The Max. range
|
≤5m
|
≤7m
|
≤10m
|
≤10m
|
≤12m
|
≤15m
|
|
Blind area Power supply |
Standard: 300mm
|
350mm
|
500mm
|
500mm
|
600mm
|
800mm
|
|
OEM:200mm
|
/
|
/
|
/
|
|||
|
Standard: DC24V
|
DC24V
|
DC24V
|
DC24V
|
DC24V
|
DC24V
|
|
|
OEM: DC12V
|
OEM: DC12V
|
/
|
OEM:DC12V
|
/
|
/
|
|
|
Beam angle
|
15°
|
12°
|
9°
|
|||
|
Operating frequency
|
38K±10Khz
|
55K±10Khz
|
40K±5Khz
|
|||
|
Accuracy
|
Standard: ±0.5%F S or ±5mm (at 25°C, Absolutely flat target under the condition of standard)
|
|||||
|
OEM: FS≤1m, accuracy can be ±1mm FS≤2m, accuracy can be ±3mm FS≤15m, accuracy can be ±0.25% FS Above OEM not available for two wire system |
||||||
|
Output signal
|
Standard: 4-20mA (3 wires)
|
|||||
|
OEM: 4-20mA(4 wires), 0-20mA, 0-5v, 1-5v 0-10v, 1-10v (both signal can not be customized DC12v) RS485(MCU protocol as default, Address=01, bps=9600) 4-20mA+RS485; 1-5V+RS485, 1~2NPN 1-10V, 0-10V, 4-20mA(two wire) - Power supply 24VDC can not be OEM |
||||||
|
Measuring mode
|
Standard: Distance mode, the distance of ultrasonic sensor surface to measuring target surface
|
|||||
|
OEM: Level mode; the distance of level surface to level bottom(the bottom of tank) NOTE: Ensuring the distance of sensor surface to the level bottom is the actual mounting height, otherwise might be have installation error. |
||||||
|
Working temp.
|
Standard: 0~50°C
|
|||||
|
OEM: Negative Temp. -10°C,-20°C,-30°C; Positive Temp. 60°C,70°C,80°C
|
||||||
|
Wiring Mode
|
Waterproof connect port, down-lead 0.5m(length can be customized)
|
|||||
|
Installation
|
Screw type or sifter clamping ; screw size: M68*2.0mm
|
|||||
|
Protection class
|
IP65, OEM of IP66, IP67, IP68
|
|||||
|
Working environment
|
Normal pressure, non-explosion-proof; non-corrosive environment
|
|||||
|
OEM: Anti-explosion symbol Exia II AT3 (DC12 V,range≤10m ) The material sensor housing: PTFE for large power sensor Strong in corrosion resistance |
||||||
|
Notes
|
1.When level range ≥15m, equip with other type ultrasonic sensors 2.Users no need to set the address, bps, installation height, so please verify to factory before ordering 3.For RS485-PC product, users can adjust the parameter by software(the default software) The max measure range depends on the smooth level surface, so please confirm the real using environment and level surface when ordering. |
|||||
SENTEC concentrates on the solutions for sensing technology.
For decades, SENTEC quality guaranteed products insist strictly manufactured in accordance with ISO, CE directive and fully RoHS compliant. On the basis of large-scaled production factories and international excellent devices, SENTEC inspections, tests and calibrations are well recognized throughout the world with experienced OEM service.
Q: How long will you give me the reply?
A: we will contact you in 1 hours as soon as we can.
){kind=link}