4-20mA Contactless Industrial Fuel Water Tank Liquid Ultrasonic Level Transmitters

• Type: Ultrasonic Level Meter
• Contact: Contactless
• Output Signal Type: RS485 or 4-20mA
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: SUL801
• Production Process: Integration
• Feature: Corrosion Resistant
• Material: ABS/PVC /PVDF/PTFE
• IP Rating: IP65, OEM for IP66, IP67, IP68
• Certification: CE,Rosh
• Customized: Customized
• Product Name: Ultrasonic Transducer Water Water Level Ultrasoun
• Accuracy: ±0.5%F S or ±5mm
• Installation: Screw Type or Sifter Clamping
• Alarms: 2 Route or 4 Route
• Working Temperature: 0~50°c
• Transport Package: Carton
• Specification: 13*10*9 0.5Kg
• Trademark: SENTEC
• Origin: China
• HS Code: 9026100000
• Production Capacity: 50000
• Package Size: 13.00cm * 10.00cm * 9.00cm
• Package Gross Weight: 1.000kg

Product Description

Product Description

SUL801 ultrasonic level gauge is a very practical level measuring sensor with simple installation and convenient on-site commissioning. Not affected by the measured medium, It can measure the liquid level of various media very well. Especially for viscous media (similar to liquid glue, slurry, etc.), where the input level sensor is not suitable for practical use. It uses SMD components and ASC chip, which makes the circuit compact and concise. The circuit board is plated and has high stability and long-term reliability. Meanwhile, the shell uses NLEPF synthetic materials with sturdy texture and good acoustic property. The transducer can be used in most working condition sites. While fixing it on the liquid wall or instrument housing, there is no need tools such as screws, but a 68mm hole. It has the features of stabilization, easy installation and disassembly

Product Parameters

Ultrasonic sensor	Low power-sensor	Middle power-sensor		Large power-sensor
The Max. range	≤5m	≤7m	≤10m	≤10m	≤12m	≤15m
Blind area Power supply	Standard: 300mm	350mm	500mm	500mm	600mm	800mm
	OEM:200mm	/	/	/
	Standard: DC24V	DC24V	DC24V	DC24V	DC24V	DC24V
	OEM: DC12V	OEM: DC12V	/	OEM:DC12V	/	/
Beam angle	15°	12°		9°
Operating frequency	38K±10Khz	55K±10Khz		40K±5Khz
Accuracy	Standard: ±0.5%F S or ±5mm (at 25°C, Absolutely flat target under the condition of standard)
	OEM: FS≤1m, accuracy can be ±1mm FS≤2m, accuracy can be ±3mm FS≤15m, accuracy can be ±0.25% FS Above OEM not available for two wire system
Output signal	Standard: 4-20mA (3 wires)
	OEM: 4-20mA(4 wires), 0-20mA, 0-5v, 1-5v 0-10v, 1-10v (both signal can not be customized DC12v) RS485(MCU protocol as default, Address=01, bps=9600) 4-20mA+RS485; 1-5V+RS485, 1~2NPN 1-10V, 0-10V, 4-20mA(two wire) - Power supply 24VDC can not be OEM
Measuring mode	Standard: Distance mode, the distance of ultrasonic sensor surface to measuring target surface
	OEM: Level mode; the distance of level surface to level bottom(the bottom of tank) NOTE: Ensuring the distance of sensor surface to the level bottom is the actual mounting height, otherwise might be have installation error.
Working temp.	Standard: 0~50°C
	OEM: Negative Temp. -10°C,-20°C,-30°C; Positive Temp. 60°C,70°C,80°C
Wiring Mode	Waterproof connect port, down-lead 0.5m(length can be customized)
Installation	Screw type or sifter clamping ; screw size: M68*2.0mm
Protection class	IP65, OEM of IP66, IP67, IP68
Working environment	Normal pressure, non-explosion-proof; non-corrosive environment
	OEM: Anti-explosion symbol Exia II AT3 (DC12 V,range≤10m ) The material sensor housing: PTFE for large power sensor Strong in corrosion resistance
Notes	1.When level range ≥15m, equip with other type ultrasonic sensors 2.Users no need to set the address, bps, installation height, so please verify to factory before ordering 3.For RS485-PC product, users can adjust the parameter by software(the default software) The max measure range depends on the smooth level surface, so please confirm the real using environment and level surface when ordering.

Company Profile

SENTEC concentrates on the solutions for sensing technology.

For decades, SENTEC quality guaranteed products insist strictly manufactured in accordance with ISO, CE directive and fully RoHS compliant. On the basis of large-scaled production factories and international excellent devices, SENTEC inspections, tests and calibrations are well recognized throughout the world with experienced OEM service.
The advance solutions, superior quality, reliable performance, customer satisfaction and excel-
lent technical services are always our sole and eternal goal!

FAQ

Q: How long will you give me the reply?

A: we will contact you in 1 hours as soon as we can.
Q:Could I visit your factory?
A: Sincerely invite you to visit our factory.
Q: Do you provide samples ?
A: Yes,we have materials in stock to help you to get the samples as soon as we can.
Q: How about the quality of the managements ?
A: We have a complete quality control system , all of our products will be fully pre-inspection by QC departments before shipping to you . We have the certification of ISO,CE we could send the certification test of our company to you
Q: What is your terms of payment ?
A: We could accept T/T, Paypal, WU ,Credit Assurance
Q: What is the warranty for your product ?
A: Warranty: 2 years, Lifetime maintenance